ACO Passavant

Lipumax Class D product details
Load Class D 210kN (AS 3996), suitable for heavy traffic, with a wheel load up to 8,000kg

Rhinocast® ductile iron access cover with precast concrete collar assembly

  • Ductile iron solid top access cover with slip resistant square surface pattern
  • Strong reinforced ribbed cover to meet Class D, AS 3996
  • Water-tight and gas-tight to AS 3996
  • Structurally reinforced precast concrete collar
  • Optional reinforced precast load distribution plate
  • Optional riser tube

Note: For structurally designed reinforced slabs and pavements, the riser tube and precast load distribution plate can be omitted see Lipumax installation.

Part No. Description Capacity (L) Weight Empty (kg) Inlet/Outlet D H (min) H (max) H1 H2 H3 H4 (min) H4 (max) PDF DWG RFA
142094 Lipumax-P NS 2 720 63 110 1935 2175 1022 952 1357 1527 1767
142095 Lipumax-P NS 4 1465 93 110 2687 2927 1774 1704 2109 2279 2519
142096 Lipumax-P NS 7 1675 108 160 2894 3134 1956 1886 2316 2486 2726
142098 Lipumax-P NS 10 2170 125 160 3376 3616 2438 2368 2798 2968 3208
142960 Lipumax-G NS 15 3000 270 100 2250 2250 1365 1295 2040 2210 2450
142961 Lipumax-G NS 20 4000 315 100 2585 2585 1630 1560 2040 2210 2450
142962 Lipumax-G NS 25 5000 460 100 2530 2530 1410 1340 2440 2610 2850

Note: NS (Nominal Size) refers to the approximate maximum flow rate of wastewater permitted to enter the grease separator (EN 1825)

 

Part No. Description Cover Lifting Weight (kg) Collar Weight (kg) Load Distribution Plate Weight (kg) Overall Weight (kg)
142299 Rhinocast® circular access cover and precast concrete collar, riser tube and load distribution plate 42.0 250.0 733.0 1025.0
142099 Rhinocast® circular access cover and precast concrete collar to suit engineered slab/pavement detail 42.0 250.0 -

292.0

142350 Riser tube (adds 170- 411mm to overall height) - - - 22.0
142311 Precast load distribution plate - - 733.0 733.0
142105 Baffle cap to suit NS 2-4 - - - 0.1
142106 Baffle cap to suit NS 7-10 - - - 0.1
84654 Short handle lifting key (Rhinocast®) - - - 0.1
84854 Long handle lifting key (Rhinocast®) - - - 0.1

Note: Cover and frame (without collar) can be supplied separately if required, contact ACO

Part No Description Specification clauses
142094 Lipumax-P NS 2

Grease separator shall be ACO Passavant Lipumax-P below ground grease separator, NS 2, total volume 720 litres, part number 142094. The grease separator shall be supplied with a SAKU® Class B 80kN (AS 3996) cover and reinforced concrete collar, part number 142119 / Rhinocast Class B 80 kN (AS 3996) cover and reinforced concrete collar, part number 142120 / Rhinocast Class D 210 kN (AS 3996) cover, reinforced concrete collar and load distribution plate, part number 142299 / Rhinocast Class D 210 kN (AS 3996) cover and reinforced concrete collar to suit engineered slab details, part number 142099.

Grease separator shall be supplied and manufactured by ACO Polycrete and installed in accordance with local codes and Standards.

The grease separator shall be manufactured in accordance with EN 1825 from polyethylene. The design shall feature a rib-structure to key into concrete and manufactured in one piece. The effluent quality must comply with EN 1825.

142095 Lipumax-P NS 4

Grease separator shall be ACO Passavant Lipumax-P below ground grease separator, NS 4, total volume 1465 litres, part number 142095. The grease separator shall be supplied with a SAKU® Class B 80kN (AS 3996) cover and reinforced concrete collar, part number 142119 / Rhinocast Class B 80 kN (AS 3996) cover and reinforced concrete collar, part number 142120 / Rhinocast Class D 210 kN (AS 3996) cover reinforced concrete, collar and load distribution plate, part number 14229/ Rhinocast Class D 210 kN (AS 3996) cover and reinforced concrete collar to suit engineered slab details, part number 142099.

Grease separator shall be supplied and manufactured by ACO Polycrete and installed in accordance with local codes and Standards.

The grease separator shall be manufactured in accordance with EN 1825 from polyethylene. The design shall feature a rib-structure to key into concrete and manufactured in one piece. The effluent quality must comply with EN 1825.

142096 Lipumax-P NS 7

Grease separator shall be ACO Passavant Lipumax-P below ground grease separator, NS 7, total volume 1675 litres, part number 142096. The grease separator shall be supplied with a SAKU® Class B 80kN (AS 3996) cover and reinforced concrete collar, part number 142119 / Rhinocast Class B 80 kN (AS 3996) cover and reinforced concrete collar, part number 142120 / Rhinocast Class D 210 kN (AS 3996) cover, reinforced concrete collar and load distribution plate, part number 142299 / Rhinocast Class D 210 kN (AS 3996) cover and reinforced concrete collar to suit engineered slab details, part number 142099.

Grease separator shall be supplied and manufactured by ACO Polycrete and installed in accordance with local codes and Standards.

The grease separator shall be manufactured in accordance with EN 1825 from polyethylene. The design shall feature a rib-structure to key into concrete and manufactured in one piece. The effluent quality must comply with EN 1825.

142098 Lipumax-P NS 10

Grease separator shall be ACO Passavant Lipumax-P below ground grease separator, NS 10, total volume 2170 litres, part number 142098. The grease separator shall be supplied with a SAKU® Class B 80kN (AS 3996) cover and reinforced concrete collar, part number 142119 / Rhinocast Class B 80 kN (AS 3996) cover and reinforced concrete collar, part number 142120 / Rhinocast Class D 210 kN (AS 3996) cover, reinforced concrete collar and load distribution plate, part number 142299 / Rhinocast Class D 210 kN (AS 3996) cover and reinforced concrete collar to suit engineered slab details, part number 142099.

Grease separator shall be supplied and manufactured by ACO Polycrete and installed in accordance with local codes and Standards.

The grease separator shall be manufactured in accordance with EN 1825 from polyethylene. The design shall feature a rib-structure to key into concrete and manufactured in one piece. The effluent quality must comply with EN 1825.

142960 Lipumax-G NS 15 / 3000L

Grease separator shall be ACO Passavant Lipumax-G below ground grease separator, NS 15, total volume 3000 litres, part number 142960, manufactured from GRP.

The grease separator shall be supplied with a SAKU® Class B 80kN (AS 3996) cover and reinforced concrete collar, part number 142119 / Rhinocast Class B 80 kN (AS 3996) cover and reinforced concrete collar, part number 142120 / Rhinocast Class D 210 kN (AS 3996) cover, reinforced concrete collar and load distribution plate, part number 142299 / Rhinocast Class D 210 kN (AS 3996) cover and reinforced concrete collar to suit engineered slab details, part number 142099.

Grease separator shall be supplied and manufactured by ACO Pty Ltd and installed in accordance with local codes and Standards.
142961 Lipumax-G NS 20 / 4000L

Grease separator shall be ACO Passavant Lipumax-G below ground grease separator, NS 20, total volume 4000 litres, part number 142960, manufactured from GRP.

The grease separator shall be supplied with a SAKU® Class B 80kN (AS 3996) cover and reinforced concrete collar, part number 142119 / Rhinocast Class B 80 kN (AS 3996) cover and reinforced concrete collar, part number 142120 / Rhinocast Class D 210 kN (AS 3996) cover, reinforced concrete collar and load distribution plate, part number 142299 / Rhinocast Class D 210 kN (AS 3996) cover and reinforced concrete collar to suit engineered slab details, part number 142099.

Grease separator shall be supplied and manufactured by ACO Pty Ltd and installed in accordance with local codes and Standards.
142962 Lipumax-G NS 25 / 5000L

Grease separator shall be ACO Passavant Lipumax-G below ground grease separator, NS 25, total volume 5000 litres, part number 142960, manufactured from GRP.

The grease separator shall be supplied with a SAKU® Class B 80kN (AS 3996) cover and reinforced concrete collar, part number 142119 / Rhinocast Class B 80 kN (AS 3996) cover and reinforced concrete collar, part number 142120 / Rhinocast Class D 210 kN (AS 3996) cover, reinforced concrete collar and load distribution plate, part number 142299 / Rhinocast Class D 210 kN (AS 3996) cover and reinforced concrete collar to suit engineered slab details, part number 142099.

Grease separator shall be supplied and manufactured by ACO Pty Ltd and installed in accordance with local codes and Standards.
Part No Description Download
142094 Lipumax-P NS 2

PDF

DWG
142095 Lipumax-P NS 4

PDF

DWG
142096 Lipumax-P NS 7

PDF

DWG
142098 Lipumax-P NS 10

PDF

DWG
142350 Riser tube

PDF

DWG
142960 Lipumax-G NS 15
PDF

DWG
142961 Lipumax-G NS 20
PDF

DWG
142962 Lipumax-G NS 25
PDF

DWG
Part No Description Download
142094 Lipumax-P NS 2

RFA
142095 Lipumax-P NS 4

RFA
142096 Lipumax-P NS 7

RFA
142098 Lipumax-P NS 10

RFA
142960 Lipumax-G NS 15

RFA
142961 Lipumax-G NS 20

RFA
142962 Lipumax-G NS 25

RFA
DRG # Description Download
IY002 Class D (AS 3996) with concrete collar, load distribution plate and riser tube

PDF

DWG
IY003 Class D (AS 3996) with concrete collar to suit engineered slab detail

PDF

DWG
IY004 Class D (AS 3996) with concrete collar and riser tube to suit engineered slab detail

PDF

DWG
IY005 Class D (AS 3996) with concrete collar to suit engineered asphalt pavements

PDF

DWG
IY006 Class D (AS 3996) with concrete collar to suit engineered brick pavement

PDF

DWG

 

pdf

Download Lipumax-P installation guide 

 

pdf

Download Lipumax-G installation guide 

Click here for more information.